opti-solar SP8000 AVR, User Manual

Page: 17 / 28

16
No. Symbol Indication Description
1. Over load
The loading exceeds the rating of
Inverter
.
2. Load level
The higher the loading, the more bars will illuminate.
3. Inverter is loaded
When “Green Mode” is enabled, this symbol will display if the loading is
over preset level (adjustable, default = 0W / disabled), and disappears when
it’s under preset level. Please refer to User’s Manual 4.9. If “Green Mode”
is disabled, the symbol will always display.
4. Normal mode
1) The sine wave symbol will display steadily without battery symbol when
Inverter
is in the normal mode.
Battery mode 2) The sine wave symbol and battery symbol will blink when the Inverter is
in back-up (inverter) mode.
Test mode
3) The sine wave symbol will display steadily with blinking battery symbol
when the
Inverter
is in testing mode.
5. Buck mode The AVR (Auto Voltage Regulator) is reducing the output voltage of the
Inverter (when the input voltage is too high), and the sine wave symbol, as
mentioned in item 4, will also display steadily to indicate that the output is in
the normal mode.
6. Boost mode
The AVR is increasing the output voltage of the
Inverter
(when the input
voltage is too low), and the sine wave symbol, as mentioned in item 4, will
display to indicate it’s in the normal mode
7. Timer is enabled
This symbol will show up in the following situations:
1) A turn-on / turn-off schedule has been set using the monitoring
software. Refer to User’s Manual 5.5 and the “Readme” file or “Help”
function of the monitoring software.
2) The Green Mode is enabled and the loading is under preset level
(adjustable, default = 0W / disabled). The
Inverter
will turn itself off
automatically in 60 seconds. Refer to 4.9 of User’s Manual.
8. Thermal alarm
Temperature inside the transformer is over 90 . If the user does not reduce
℃
the load, the temperature will continue to rise and the inverter will shut down
automatically at 95
.
℃
9. Fan is in “High
speed” The symbol will display whenever the cooling fan is running (or high speed),
and will disappear when it is off (or low speed).
10. Silence mode
The audible alarm has been silenced. To reset the alarm in Back-up
mode, push the control button (not available during low battery level or
abnormal condition).
11. Inverter fault The Inverter has failed and must be repaired. Contact a qualified service
person.
12. Battery normal
1) In normal operation, this symbol indicates a charged battery.
Battery low 2) When the battery charge level is low, the word “LOW” will be added to
the symbol.
13. Battery
replacement
The battery has failed and must be replaced. The battery is checked each
time the Test Function is executed.
14. Battery voltage
level 1) The higher the battery voltage, the more bars will illuminate.
2) When the
Inverter
is charging the battery, the battery symbol and the
level indicator will blink together.
HIGH