opti-solar SP8000 AVR, User Manual

Page: 3 / 28

2
CAUTION:
●
The inverter connection instructions and operation described in the manual must be followed in the
indicated order.
●
The inverter must be connected to a near by wall outlet that is easily accessible. The inverter can
be disconnected from the AC-power source by removing the power cord.
●
Check that the indications on the rating plate correspond to your AC-power system and to the actual
electrical consumption of all the equipment to be connected to the inverter.
●
Never install the inverter near liquids or in an excessively damp environment.
●
Never let a foreign body penetrate inside the inverter.
● Never block the ventilation grates of the inverter.
●
Never expose the inverter to direct sunlight or source of heat.
●
If the inverter must be stored prior to installation, storage must be in a dry place.
●
The admissible storage temperature range is -15
℃
to +55
℃
.
●
All handling operations will require at least two people (unpacking, installation in rack systems).
● Once installed and connected to the AC power source for the first time, the battery will start to
charge. Full charging to obtain the rated battery backup time requires at least 8 hours.
●
Before and after the installation, in case of any doubt, do Not hesitate to contact our service
department.