Optex iVision+, User Manual

Page: 9 / 16

- 8 -
4-2. Using SNAP function to capture an image
4-4. Ending ANSWER / BROWSI NG MODE (Returning to I DLE MODE)
Press OFF button to terminate ANSWER or BROWSI NG MODE
and return to I DLE MODE.
4-3. Operating OPEN DOOR function
the Handheld Monitor Unit can capture an image from a Door
Camera Unit and stores up to 500 images in an internal memory.
20XX/XX/XX 11:59AM
During ANSWER or BROWSI NG MODE, press SNAP to record
a still image from the Door Camera Unit. An REC I ndicator in red
will appear on the top of the screen for 1 second.
REC I ndicator
OPEN DOOR function is only available if iVI SI ON+ system is expanded with
a Gateway Chime Unit(I VP-GU) and properly connected to a third party equipment.
OPEN DOOR
DOOR1 DOOR2
Pressing OPEN DOOR button will bring an OPEN DOOR menu
on the screen. Select DOOR1 or DOOR2 to activate a designated
output relay on I VP-GU. Two short beeps will confirm the
signal transmission. Return to I DLE MODE by pressing OFF.
I DLE MODE
During ANSWER/ BROWSI NG MODE
Pressing OPEN DOOR button while answering a call or
browsing directly activates the I VP-GU output relay designated
to a Door Camera Unit. This is indicated on the top of the screen.
20XX/XX/XX 11:59AM
ANSWER/ BROWSI NG MODE
I ndicator for a Door Camera Unit in operation
Pressing OFF button for more than 3 seconds will turn off the
power of the Handheld Monitor Unit. When the power is turned
off the unit will not respond to a call from a Door Camera Unit.
CAUTI ON
CAUTI ON