ENGLISH
FRANÇAIS
DEUTSCH
IT
ALIANO
ESP
AÑOL
PORTUGUÊS
EN-2
Do not install two or more HX-40DAM’s units side-by-side or face-to-face. Instead, install them back-to-back.
If mounting on the same wall, be sure they are at least 1.0 m (3.3 ft.) apart from each other.
1.0 m (3.3 ft.) or more
Install the detector in a place where it is free from false alarm factors. For example:
• Sunlight and reflection
• Heat source
• Objects moving in the wind
Screw kit
For joint
For wall mounting
For hood
Screw (4 × 20 mm)
Screw (4 × 20 mm)
Screw (3 × 10 mm)
*Lock screw attached on bracket base
Bracket base
Screw (3 × 10 mm)
Area masking seal
Main unit
Bracket
LED indicator
Lock screw* (M4 × 35 mm)
Lens
Base
PIR sensor
(Do not touch)
Terminals
Shaft cover
Cover
Lock screw
Hood
Anti-masking
infrared LED
(HX-40AM/DAM
only)
Microwave unit
(HX-40DAM only)
(Do not touch)
Screw (4 × 20 mm)
1-2
PARTS IDENTIFICATION
-Precautions for installing two or more sensors
HX-40
HX-40AM
HX-40DAM
Less than 1.0 m (3.3 ft.)
