Opitec MANITOU 101.200, Manual

Page: 15 / 28

101.200
14
200
20
0
300
15
0
Fork lift truck “MANITOU”
Bodywork
Parts Nr: 39-43
Cut out the patterns 1-6 (See page 23 & 24) and lay them out on the metal sheet, hold them in position with
tape or glue
Cut out the shapes with metal snips along the thicker lines.
In patterns 1 and 4 along with the contour lines other inner cuts must be made. ( Along the thickened lines )
In patterns 2/3 there are also 3mm diameter holes to be drilled. In pattern 6 4mm holes.
Pattern 1
Pattern 2 Pattern 3
Pattern 5
Pattern 6
Pattern 4