Opitec MANITOU 101.200, Manual

Page: 6 / 28

101.200
5
90
Fork lift truck “MANITOU”
Part Nr:3
Form an eye in one end on the ends of the
welding rod as shown.
Part Nr:50
Cut off 8 blocks from the connector block and
fix with 2 self tapping screws (46)
centrally between the two rear axle holders.
Join both welding rods together in a connector block ( lightly tighten)
Hook the eye at the end of rod through the 2mm dia hole in the axle holder.
Tighten the loop afterwards with a pair of pliers so that it cannot spring out.
The tracking can be adjusted later when both sets of wheels are in position.
Hook the eye in the welding rod
through the hole and tighten
Part Nr. 46