Opex FalconV, User Manual

Page: 19 / 130

Operation 19
FalconV User Manual - Standard Scanning - OPEX Corporation
Main power switch The main power switch is located on the left cover, as
shown in Figure 2. This is the main “on/off” switch for the FalconV system.
UPS (Uninterrupted Power Supply) The APC UPS supplies battery power
to the PC and monitor to allow a controlled shutdown of the Windows operating
system. The scanner should be plugged into the “surge only” side of the UPS.
CertainScan PC The 64-bit PC with Windows 7 or Windows 10 operating
system houses OPEX’s feature-rich CertainScan 4 host software.
Touchscreen monitor Use the monitor to log in and out of the FalconV
system. The monitor’s touchscreen controls should be used to operate the
system and run jobs.
Keyboard/mouse Typically, the keyboard and mouse are only used for
setting up jobs and for use with other software. Use the touchscreen monitor
for running jobs and operating the machine.
Multi-slot ID Assist (option) This option requires the use of an external
tower which has three slots. Multiple actions can be performed based on how
you swipe items in the tower’s three slots. For more on using the optional Multi-
slot ID Assist feature, see “About the Multi-slot ID Assist” on page 87.
MFD Override button The MFD override button
allows you to disable the ultrasonic multifeed
detector when you are scanning thicker pieces,
such as items with sticky notes attached.
IdAssist indicator The blue IdAssist indicator
LED will light up when running a job that includes
IdAssist. Also, when the operator triggers IdAssist
the LED will go out briefly, indicating to the
operator that IdAssist has been activated. For more
on using IdAssist, see “ID Assist” on page 85.