background image

28

 

opera-care.co.uk

  |  

0333 222 8584

  |

6.3 

Intended Use 

T

he Opera Solo Bed is intended for accomodating patients/occupants with a 

maximum body mass of 165kg for the Opera Solo Bed 90 and 215kg for the 
105 and 120. The bed is designed to be used in residential homes, nursing 
homes and the domestic environment as a care bed for adults. The bed can 
only be used with accessories that are provided by Opera Care, such as the 
Opera Solo Telescopic Side Rails and the Opera pressure care mattress range. 
Using the bed under different conditions will be regarded as non-intended use, 
invalidating the Terms Conditions and Warranty, excluding Opera from any 
liability.
The Opera Solo Telescopic Side Rails are intended for use with the Opera Solo 
Beds. The split side rails are designed to help prevent occupants from falling/
rolling out of bed, they are not designed to be climbed, leaned on or used for 
children. They may only be used under the conditions for use described in this 
Instruction Manual.  

6.4 

Non-intended Use

A non-intended use is a use that deviates from the intended purpose and
is not outlined in the Instruction Manual.
Non-intended uses include, but are not limited to the following:
•  Loading the bed beyond the safe admissibe working load (refer to pg 32).
•  Operation of the care bed by occupants who have not been instructed 
        on its use.
•  Use of the bed for children.
•  Attempting to move the bed in its braked position.
•  Using the bed for transporting occupants.
•  Use of the bed on a non-horizontal surface (max incline of 5 
        degrees).
•  Use as a hospital bed or in hospitals.
•  Use with electrical applications which involve intravascular or 
         intercardiac processes with the occupant.
•  Use with any devices that will compromise the general safety and 

performance requirements of the care beds.

6. 

General Information

Summary of Contents for Solo Bed 105













































Reviews: