25
|
Opera Care
Solo Bed Installation Guide and Technical Specification | Version 1
5.3
Safety Information for the User
Ensure that the operator instructs you in the safe operation of this bed.
In addition, pay particular attention to the general safety information laid out in
section 5.1.
Adjustments of the bed must only be carried out by suitably instructed persons
or in the presence of an instructed person.
Make sure that the bed has travelled to its lowest position before leaving the
patient unattended. This will minimise the risk of injury to the patient when
getting in or out of bed. The mattress platform should be kept in a flat position if
a patients condition could lead to entrapment.
If there is a suspected fault or damage, disconnect the mains plug from the
socket. Clearly mark the care bed as “Out of Order” and take it immediately out
of service. Then inform the person responsible for the bed immediately.
5
. Electrical and Earthing
Do not, under any circumstances, cut or remove the earthing prong from any
plugs. If you must use an extension cable, use only a three-wired extension
cable with the same or a higher elecrtrical rating as the connected device.
Do not use if the power cable is cut, frayed or loosely connected to the device.
5.4
Cleaning and Disinfection
Before cleaning and disinfection, the mains plug must be disconnected and
hung up safely. Plugs for the handset and the motors that are plugged into the
control box must remain in their sockets. This is necessary to prevent water
from getting into the control system.
Do not immerse electrical components in water but wipe them with a damp
cloth.
The bed and castors may be cleaned with a cloth dampened with water and
mild detergent, or a non-abrasive cleaner.
The electrical components must not be cleaned with a high pressure cleaner or
a water jet. Only disinfection by wiping is permitted
.
ELECTRICAL
i
ELECTRICAL
5.
Safety Instructions
5.
Safety Instructions