30757AC
39
Sensitivity
Sensitivity allows you to change the sensitivity of motion detection function. A greater value represents
more sensitive detection (motion events will be easier to trigger).
Block Threshold
Block Threshold allows you to change the amount of motion needed to register a motion event. This
number represents the number of blocks on the 16x12 grid that are required to be detecting motion
before a motion event is registered. Selecting the minimum (1) means that only one block needs to be
detecting motion for it to register as a motion event. Selecting the maximum (16) means that sixteen
grid blocks need to be detecting motion for it to register as a motion event.
Configure the Recorder for Motion Based Recording
By default the recorder is configured to record continuously with the configuration of “Best Quality.”
To change to motion only recording:
1. Press
MENU
.
2. Select
CAMERAS
and press
ENTER
.
3. Select
Motion Detection Setup
and press
ENTER
.
4. Select
Motion Detect
and press
ENTER
.
5. Press
DOWN
arrow to change the selection to
On
and press
ENTER
.
6. Press
ESCAPE
.
7. Select
Copy Settings
and press
ENTER
.
8. Select
Select All
and press
ENTER
.
9. Select
Confirm
and press
ENTER
.
10. Press
ESCAPE
.
11. Select
SCHEDULE
and press
ENTER
.
12. Select
Global Configuration
and press
ENTER
.
13. Press
UP
arrow
three times
to change the selection to
Event Only
and then press
ENTER
.
14. Press
ESCAPE
.
Summary of Contents for EasyDVR OE1-D12004
Page 1: ...www openeye net User Manual OE1 D12004 OE1 D24008 OE1 D48016...
Page 2: ...2 NOTES...
Page 8: ...8 NOTES...
Page 17: ...30757AC 17 NOTES...
