3
2
Be sure to read this User’s Manual before starting the operation of the receiver.
Do not open the cover. It is dangerous to touch the inside of the receiver due to
possible electric hazard.
MAINS SUPPLY : 95
�
240V AC 50/60Hz
LOCATION : Locate the receiver indoor.
Locate receiver away from potential hazards such as houseplants, lighting, raining and direct sunlight.
OVERLOADING : Do not overload wall outlets, extension cords or adapters as this
can result in fire or electrical shock.
LIQUIDS : Keep liquids away from the receiver.
CLEANING : Before cleaning, disconnect the receiver from the wall socket.
Use a cloth lightly dampened with water (no solvents) to clean the exterior.
VENTILATION : Do not block the receiver ventilation holes. Ensure that free airflow is
maintained around the receiver.
Never set the receiver on soft furnishings or carpets. Do not use or store the receiver
where it is exposed to direct sunlight, or near heater.
Never stack other electronic equipment on top of the receiver.
Place the receiver at least 30mm from the wall.
ATTACHMENTS : Do not use any attachment that is not recommended by the manufacturer,
as it may cause a hazard or damage the equipment.
CONNECTION TO THE SATELLITE DISH LNB : The LNB connector cable has a
voltage in its center core. It is therefore recommended that the receiver is disconnected from
the mains power before connecting or disconnecting this cable.
FAILURE TO DO SO COULD DAMAGE THE LNB.
SERVICING : Do not attempt to service this product yourself. Any attempt to do so will
make the warranty invalid.Refer all servicing to a qualified service agent.
LIGHTNING : If the receiver is installed in an area subject to intense lighting activity,
protection devices for the receiver mains connector and modem telephone line are essential.
The individual manufacturer
’
s instruction for safeguarding other equipment, such as TV set,
Hi-Fi, etc., connected to the receiver, must also be followed during lighting storms.
GROUNDING : The ground of the LNB cable must be directly connected to the system
ground for the satellite dish. The grounding system must comply with local regulations.
1
. SAFETY INFORMATION
2
. FEATURES
MPEG-2 & Fully DVB Compliant
MPEG-2 Video (MP@ML), MPEG-1 Audio Layer1,Layer2
PLL RF-Modulator UHF 21~69 with PAL B/G,I, D/K
LNB Controlling Logic (0/22KHz Tone, 13/18V)
SCPC/ MCPC Receivable from C/Ku-Band Satellite
Digital Tuner with Loop-through
Wide Symbol Rate 1~45Mbps & Frequency Input 950~2150MHz
DiSEqC1.2 Supported
2 SCART for TV, VCR
User friendly OSD Menu with Full Function
256 Colors Graphic User Interface
Multi-language Menu
4-digit 7-segment LED Display
Variable Aspect Ratio (4:3, 16:9) with Pan Vector or Letter Box
EPG(Electronic Program Guide) On-screen Channel Information
Small Screen Picture on EPG
Teletext and Subtitle Supported (VBI&OSD)
Installation by Easy Setup Guide
Fast Booting & Auto Scan
Quick Channel Changing
Max. 4000 Channels(TV & Radio) Programmable
Radio Channel Background Display
Favorite Channel List Programmable
Master PIN Code Function & Parental Lock Function
Automatic Detection of Forward Error Correction
Automatic NTSC / PAL Detection and Simple Video Converter
S/W Download Program Supported by RS232 Serial Port
Set to Set Download
3 RCA Output for Video, Audio L/R
Games (SOKOBAN & SLOT machine)
Digital Audio Output : S/PDIF(Option)
