9
8
1) LNB IN : This is to Connect the coaxial cable from LNB of your Dish.
2) IF OUT : This is to enable the connection of an other receiver, The receiver is provided with this port.
Connect this port to LNB IN port of the other receiver via RF Cable.
3) ANT IN : This is used to connect your local RF channels to your TV through Loop
4) TV OUT : This is used to connect your TV through RF cable.
5) SERIAL PORT : This is used to connect your receiver with computer through a serial cable.
This port can be used for upgrading software.
6) VIDEO, AUDIO R/L : These RCA connectors are used to connect any external video and audio.
7) TV SCART : This is used to connect your TV through SCART.
8) VCR SCART : This is used to connect your VCR.
9)S/PDIF (DIGITAL OUTPUT): This port is for the connection to the exterual Hifi system which has a
optical S/PDIF input interface. (Option)
10) POWER INPUT : This is to plug in the AC main power cord.
The input AC volts range is 95V to 240V, 50Hz/60Hz supply.
4. 3. REAR PANEL
4.2. FRONT PANEL
1) POWER : Push the receiver on and off (stand by).
2) CH : Changes the channels and moves the cursor up / down in
menu mode.
3) VOL : Increases and decreases the volume level manually and
changes setting in menu mode.
5) 7 SEGMENT DISPLAY : This SEGMENT display will show the
current channel number.While the receiver is in stand by mode,
the display will show the current time.
4) INFRARED SENSOR : This is to receive the IR commands from
the RCU. Do not block the view of the sensor.
6) SMART CARD INTERFACE SLOTS : To watch scrambled
channels you should insert a smart card into Smart Card Interface
issued the service provider whom you subscribes to. Therefore
you can watch only a specific range of channels with entitlements
in smart card. The smart card includes information to decipher
parameters necessary for descrambling the program. Please note
that the gold chip on the smart card should face download and
inward when you insert when you insert it into Smart Card
Interface. (Option for CAS model only)
①
②
④
⑤
⑧
⑩
③
⑥
⑦
