19
18
1. Power Supply
Type
Input Voltage
Fuse Rating
2. Tuner
Input Frequency
Input Signal Level
Input Impedance
Connector Type
LNB Power Supply
22KHz Tone
DiSEqC
Channel Selection
3. Demodulator
Type
Symbol Rate
Inner FEC
Outer FEC
4. Video Decoder
System Decoding
Profile and Level
Data Rate
Video Formats
: SMPS
: 95
�
240VAC 50/60 Hz
: 250V/T2A
: 950
�
2150MHz
: -65
�
-25dBm
: 75
Ϊ
Unbalanced
:
‘
F
’
Type Female
: 13V/18V, Max 500mA with Short Circuit Protection
: Frequency 22
±
4KHz, Amplitude 0.6
±
0.2Vpp
: 1.0 & 1.2 Version Compatible
: PLL Frequency Synthesizer
: QPSK Demodulation(DVB-S)
: 1
�
45 MS/s
: Viterbi Convolutional Coding
Rate 1/2, 2/3, 3/4, 5/6, 7/8
: Reed Solomon Coding(204,188) T=8
: MPEG-2 ISO/IEC 13818-2
: MPEG-2 MP@ML
: 1
�
15 MB/s
: 4:3(Normal) & 16:9(Widescreen)
Symptom
Cause
Result
No or bad signal
You have forgotten
your PIN number
The remote controller
does not operate.
The satellite dish is not
pointing at the satellite.
Signal too strong
Satellite dish is too small.
The LNB is faulty.
The batteries of the remote
controller are not inserted
or exhausted.
Change the LNB.
Contact your dealer, and then
reset your receiver.
Check whether the batteries
are inserted correctly in your
remote controller.
Check and replace the
batteries of the remote
controller.
Adjust the dish.
Connect the signal attenuator
to the LNB input.
Change to a larger dish.
7
. TECHNICAL SPECIFICATIONS
