background image

Open Grow LDA guarantees the purchaser that the product is free from material 

and/or manufacturing defects. Open Grow LDA’s liability is limited to the repair 

or replacement of any defective parts. Do not ship directly to Open Grow LDA 

without first consulting with us to verify the procedure that should be followed.

Contact our technical services at 

[email protected] 

All Open Grow LDA products have a 2-year guarantee except for consumables 

(sensors and/or actuators of any type) and under normal use. 

After the first 6 months the customer should prove that the breakdown is a 

result of a manufacturing defect. 

The loss of the “GroNode” module’s internal battery life as a result of its ageing 

is not considered a manufacturing defect. Follow the replacement procedure 

indicated  in  the  user  manual  available  on  your  application  or  request  more 

information from the technical services. 

A  guarantee  claim  is  non-transferable  and  only  the  original  purchaser  can 

submit one. To enforce the guarantee the customer must always provide the 

purchase invoice. 

GUARANTEE DISCLAIMER:

 

Application of the guarantee is excluded should the breakdown of the defective 

part  or  parts  be  a  result  of  the  product’s  inadequate  and/or  negligent  use. 

Understood as inadequate and/or negligent use is any use other than the one 

for which the product is meant and/or that is recommended in the instructions 

manual,  not  executing  the  maintenance  operations  recommended  in  the 

instructions  manual,  carrying  out  operations  that  are  different  from  those 

mentioned and that compromise the quality of the product, modifications that 

are  not  performed  by  authorized  repairers  and/or  with  non-original  or 

non-approved parts. 

 

Open Grow LDA reserves the right to update and/or modify the 

content of its products at any time without prior warning. Check 

out our conditions at www.opengrow.pt 

Summary of Contents for GroLab PowerBot





















Reviews: