Open Grow GroLab PowerBot, Installation Manual

Page: 15 / 20

If you detect that the signal has been interrup-
ted, with the module on, press the reset button
(4) and wait a few seconds. Check the software to
see if the communication has been re-establi -
shed.
If the problem persists, perform a test run by
placing the module next to GroNode and check
the status of communication in the software. If
communication has been successfully re-establi -
shed, repeat this operation at different distances
until you detect the maximum communication
distance.
If GroNode does not detect your module even
when next to each other, contact our technical
support.
www.opengrow.pt
support@opengrow.pt