!
Installation guide
Please install with the supporting devices.
Installation
Please confirm the following things before installation:
1 If the POE port power meet the power requirement of the connecting devices.
2 If the POE standard requirement and power supply match with the power receiving device,
“
1/2+
、
3/6-
(
-span)/
4/5+
、
7/8-(Mid-span).
End
3 If the output power of the supporting power adapter is consistent with the specification in the label of the POE switch.
Please install the POE switch according to the following steps:
1 Put the POE switch on the surface of a large and stable table.
2 Plug the power adapter into the power connector, and then connect the power outlet through the power cord.
3 Connect the network devices to the POE switch port though network cable.
Please do not put heavy products on the POE switch, and please ensure good ventilation environment for the POE
switch.Please cut off the power first before plugging the power adapter.
Power
Connect the power cord, plug it in, turn on the power. When turned on, the switch will automatically initialize, and
at this time the following cases will occur for the LED lights:
1 Except the POE port lights, all the other lights will be off after bright, which means the restoration is successful.
2 Power LED remains lit.
If initialization is inconsistent with the above, please check the power.
Note
!
Note
