Product overview
Product Introduction
10/100/1000M PoE switch can provide both 10/100/1000M Ethernet data and Power over network cable, it
can be used as Ethernet Power Sourcing Equipment, it can automatically detect and identify whether connected
devices such as IP camera comply with standard IEEE PoE 802.3af, 802.3at and supply power for them. 10/100/
1000M PoE switch easier the deployment of Wireless AP, IP camera and IP-based network equipment.
PoE Technology is Power over Ethernet technology, It is refering to transfer both Ethenet data and and DC Power at the same time for IP Phone,
Wilress AP, IP-based camera. These devices which receive DC power is called Powered Device(PD).
Note
The product ‘Switch’ mentioned in the manual, if without a special request, it is refering to 10/100/1000M
PoE switch, PoE switch in short in below.
Feature
Comply to IEEE802.3, IEEE802.3u, IEEE802.3af(
POE33604P support 15.4W only),
IEEE802.3at.
10/100/1000M self-adaptive, down link port support PoE.
All the ports support Auto MDI/MDIX.
Each PoE port support Power up to 15.4Watts(IEEE802.3af), 30Watts(IEEE802.3at)
Comptible with Powered device applied to IEEE802.3af
Support IEEE802.3x Full Duplex flow control and Duplex backpressure flow control fuction
Automatic MAC address learning and aging.
4K MAC Address
16G Broadband and
Kb forwarding memory.
192
High perf rmance full load power configuration.
o
LED indicator monitor working status and help fault detection
!
