Indicator description:
Indicator
Status
Description
Power indicator: P
Green LED ON
Normal Power Supply
System Indicator: SYS
Please confirm that the PD devices are complying with IEEE802.3af/at standard.
Priority:
switch port will be sorted by priority, port1, port2, port3, port N then power supply of lowest priority will be off.
this function will protect device when it is overload, if all PD consumption are higher than specified,
Power port, Power adapter:
supply; Please input AC110-245V\50Hz for internal power supply switch.
please use 48V power supply, the switch will be damaged if use mismatched power
PoE port:
you can estimate the working status of each port on front panel LED.
The PoE ports include PoE function, it can transmit power and data when connected matching device,
Ethernet Port:
also you can estimate the working status of each port on front panel LED.
Except PoE port, other port are Ethernet RJ45 port, all port support Auto MDIMDIX, plug and play,
Link indicator: Link
!
Note
Grey
Power OFF
Green LED ON
Connected PD Device, working properly
Green LED Blink
Short circuit or current overload
OFF
No Connected PD or Power OFF
Yellow LED Blink
Data transmission properly
Yellow LED ON
Connected with 10Mbps, 100Mbps or 1000Mbps PD
OFF
No connected PD
Green LED ON
Working in 100M rate mode
Green LED OFF
Do not work in 100M rate mode
Green LED ON
Working in 1000 rate mode
M
Green LED OFF
Do not work in 1000 rate mode
M
Rate indicator: 100M
Rate indicator: 1 00M
0
Green LED ON
Working in 1000 rate mode
M
Green LED OFF
Rate indicator: 1 00M
0
POE33064P
Working in 10/100 rate mode
M
