SHENZHEN ONTIME TECHNOLOGY CO.LTD
18
time. During the IHS test procedure you can press the ENTR
key to stop the procedure manually. After the IHS test
procedure, press the MENU key to return to standby status
while menu item select interface.
Arc Test
Press the ARC_TEST key while standby, the controller will
enter into arc test interface, the controller will ask you to press
the ENTR key to confirm and start the arc test procedure. You
can press the ARC_TEST key to exit or the ENTR key to start
the arc test procedure. During the arc test procedure you can
press the ENTR key to stop the procedure manually. After the
arc test procedure, press the ARC_TEST key to return to
standby status.
Inner parameters configuration
Caution: All inner parameters should not need to be changed
after the controller had been installed and debugged properly
by the CNC cutting machine manufactory. They are only
provided to a trained engineer to optimize the technical
performance.
Summary of Contents for AVC118
Page 4: ...SHENZHEN ONTIME TECHNOLOGY CO LTD 4 Pictures...
Page 27: ...27...
