2
Getting Started
Scope of this Guide
This booklet helps you get started using your new OnStream Digital Tape Drive
quickly. By following these step-by-step instructions, you will learn how to:
T
Locate the items needed to install your OnStream Digital Tape Drive and
software
T
Set the SCSI ID jumper on your OnStream Digital Tape Drive
T
Install your OnStream Digital Tape Drive in your server or workstation
T
Install your server backup software or OnStream Echo™ workstation software
T
Use OnStream ADR™ cartridges
T
Use OnStream Echo with your OnStream Digital Tape Drive
Online User Guides
In most cases, this guide provides all the information necessary to install and use
your OnStream Digital Drive. Complete drive installation and software user
guides are supplied in Adobe
®
Acrobat™ (PDF) format on the Installation CD-
ROM. If you need more information while installing or using the drive or
software, refer to the appropriate user guide.
To access the user guides on the CD-ROM:
1.
Insert the OnStream Installation CD-ROM into your computer’s CD drive.
2.
When the OnStream CD Setup program starts, click Read Online User Guides.
Note: If the OnStream CD Setup program does not start automatically, click
the Start button on your Windows Taskbar, click Run, type
d:\setup.exe,
replacing
d: with the letter assigned to your CD-ROM drive, and click OK.
3.
Select the document you want to view or print.
Documents on CD-ROM require Acrobat™ Reader to view and print. If you do
not have Acrobat Reader installed on you computer, the OnStream CD Setup
program automatically installs it for you.
SCSIGSGuide.book Page 2 Tuesday, January 19, 1999 1:02 PM
