Online USV ZINTO E 800, User Manual

Page: 49 / 90

M A I N T E N A N C E
49 / 90
ZE800_manual_ger_eng_it_V1.0.2.doc
..............................................................................
R. Kistler
6.4 Battery change
NOTE
Do not remove the batteries while the UPS system is running
in battery mode.
Thanks to the hot-swap function, the batteries can be replaced with-
out shutting down the UPS system and without having to disconnect
the connected loads.
If you would prefer to disconnect the UPS system from the power
mains before replacing the batteries, please read the "
Startup and
shutdown" section.
CAUTION

Maintenance work should be performed by a qualified tech-
nician who is experienced in working with batteries and un-
derstands the necessary safety precautions. Keep unauthor-
ised personnel away from batteries

Batteries can pose a risk of electric shock or injury due to
high short-circuit currents. Comply with the following safety
precautions:
o
Remove watches, jewellery and other metal objects from
your body
o
Use only tools with insulated grips and handles
o
Do not place tools or metal parts on to the batteries

The batteries may only be replaced with the same number of
batteries of the same type

Batteries must be disposed of properly. Comply with the local
regulations for the proper disposal of batteries

Batteries may not be incinerated. There is a risk of explosion

Do not open or damage the batteries. The battery acid can
attack the eyes and skin as well as cause poisoning