Online USV ZINTO E 800, User Manual

Page: 47 / 90

C O M M U N I C A T I O N
47 / 90
ZE800_manual_ger_eng_it_V1.0.2.doc
..............................................................................
R. Kistler
1. Connect cable (5) or (6) to the RS-232 or USB interface of the
computer system to be protected (cable included in delivery).
2. Connect the other end of cable (5) or (6) to the USB interface
(1) or RS232 port (2) of the UPS system.
5.2 DataWatch software
The standard scope of supply of the ZINTO E series includes Da-
taWatch, the comprehensive software solution for the shutdown and
management of the PC or server system, as well as for the monitor-
ing of ZINTO E and the power supply mains.
DataWatch works in the background and communicates constantly
via RS232, USB, or network protocol with ZINTO E. The best known
function of all: Automatic data backup with the closing of running ap-
plications and the orderly shutdown of the entire system by means of
freely configurable shutdown routine. DataWatch also includes a
comprehensive messaging system, scheduled test routines and
event logging.
DataWatch supports all current operating systems.
As client/server application, DataWatch works in networks and on lo-
cal workstations. Using the optional RCCMD agent (Remote Console
Command), multiple servers connected to a UPS system can be ac-
tivated and controlled via the network without additional hardware.
5.3 USB for HID power device
The USB interface is equipped with the standard "Human Interface
Device" (HID) protocol. Using this protocol, various devices (e.g.,
NAS) can be connected directly with the UPS system. Additional
software (e.g., DataWatch) is not required for this purpose. Commu-
nication with the UPS system takes place using the integrated hard-
ware controllers in the connected devices.