O P E R A T I O N
45 / 90
ZE800_manual_ger_eng_it_V1.0.2.doc
..............................................................................
R. Kistler
Shutdown
1. Keep the button
on the UPS system pressed for three sec-
onds.
The UPS system emits a brief acoustic signal. The UPS sys-
tem switches to standby mode and the display
goes out.
NOTE
If the button
is released after less than 3 seconds, the
UPS system will return to its previous operating mode.
2. Plug the power cable of the UPS system into a socket. The
display of the UPS system goes out after a short time and the
UPS system shuts down completely.
Summary of Contents for ZINTO E 800
