background image

58

Basic Operations

—Continued

a. Station List (Sorting Stations)

You can sort and list scanned stations by alphabetical 
order, Multiplex order, Favorite order, or Active Station 
order.
You can then select the station you want to listen to from 
the list.

Alphabetical Order (Default):

 Sorts stations in 

alphabetical order.

Multiplex Order:

 Sorts stations in multiplex order.

Favorite Order:

 Sorts stations in descending order of 

frequency played.

ActiveSt Order:

 Lists receivable stations in the fore-

front.

TrimStation:

 

Deletes an unreceivable station from the station list.

b. Auto Scan

 

Mode

Determines band range with which the DAB scans sta-
tions.

UK:

 During auto scanning, the DAB scans U.K. area 

using only Band III (11B-12D). 

Worldwide (Default):

 During auto scanning, the 

DAB scans both Band III (5A-13F) and L-Band (LA-
LW).

c. DRC Value

Adjusts sound dynamic range so that louder signal may 
be reduced and soft one amplified during play.
It is useful when you enjoy play with the volume set to 
the minimum at midnight or other occasions.

1 (Default):

 Adjusts the dynamic range. Adjustment 

with 1 is greater than with 1/2. 

1/2:

 Adjusts the dynamic range.

0:

 Does not adjust the dynamic range.

Antenna Aiming

Displays the specified reception multiplex radio wave 
strength and adjusts the direction and position of the 
antenna.
Multiplex can switch bands and frequencies, and display 
both the reception signal strength required for decoding 
the applicable multiplex and the current reception 
strength.

d. Band:

 Selects band to receive (Band III/L-Band).

e. Channel:

 Selects channel to receive (5A-13F, LA-

LW).

By referring to the display information, adjust the direc-
tion and position of the antenna so that the reception 
level exceeds the borderline.

Note:

The sound will be muted during operations with the 
Antenna Aiming screen.

DAB Setup

1

Press the [SETUP] button.

The main menu appears on the display.

2

Use the [UP] and [DOWN] buttons to 
select “5. DAB Setup” and then press 
[ENTER].

The DAB Setup menu appears.

Poor level

Borderline

Clear level

Summary of Contents for TX-SR653E





























































































Reviews: