background image

10

Front & Rear Panels

—Continued

The page numbers in parentheses show where you can find the main explanation for each item.

1

MUTING indicator (53)

This indicator flashes while the AV receiver is 
muted.

2

ZONE 2 indicator (78)

This indicator lights up when Zone 2 is selected.

3

Listening mode & format indicators 

These indicators show the currently selected listen-
ing mode and the format of digital input signals.

4

Tuning indicators (55)

TUNED: 

This indicator lights up when the AV 

receiver is tuned into a radio station.

AUTO: 

This indicator lights up when the Auto Tun-

ing mode is selected, and disappears when the Man-
ual Tuning mode is selected.

RDS: 

This indicator lights up when the AV 

Receiver is tuned to a radio station that supports 
RDS (Radio Data System).

MEMORY: 

This indicator lights up when preset-

ting radio stations.

FM STEREO: 

This indicator lights up when the 

AV receiver is tuned to a stereo FM station.

5

SLEEP indicator (53)

This indicator lights up when the Sleep function has 
been set.

6

Message area

This area of the display shows various information 
about the currently selected source.

Display

1

2

3

4

5

6

Summary of Contents for TX-SR653E





























































































Reviews: