background image

123

Appendix

Front Panel

   Rear Panel

   Remote

Contents 

  Connections 

  Playback 

  Setup 

About HDMI

Compatible functions

HDMI (High Definition Multimedia Interface) is a digital interface standard for 

connecting TVs, projectors, Blu-ray Disc/DVD players, digital tuners, and other 

video components. Several separate video and audio cables have been required 

to connect AV components so far. With HDMI, a single cable can transmit control 

signals, digital video and digital audio (2-channel PCM, multichannel digital audio, 

and multichannel PCM).
HDMI CEC function:

By connecting a device that complies with CEC (Consumer Electronics Control) 

of the HDMI standard using an HDMI cable, a variety of linked operations 

between devices are possible. This function enables various linking operations 

with players, such as switching input selectors interlocking with a player, 

adjusting the volume of this unit using the remote controller of a TV, and 

automatically switching this unit to standby when the TV is turned off.

The unit is designed to link with products that comply with the CEC standard, 

however, linked operation is not always guaranteed with all CEC devices. 

For linked functions to work properly, do not connect CEC-compliant devices 

exceeding the connectable number to the HDMI jack as shown below.

• 

Blu-ray Disc/DVD players: up to 3 units

• 

Blu-ray Disc/DVD recorders: up to 3 units

• 

Cable TV tuner, terrestrial digital tuner, and satellite broadcasting tuner: up to 

4 units

Operation has been confirmed on the following devices: (As of January 2018)

Toshiba brand televisions; Sharp brand televisions; Onkyo and Integra brand 

RIHD-compatible players; Toshiba brand players and recorders; Sharp brand 

players and recorders (when used with a Sharp brand television)
ARC (Audio Return Channel):

By connecting an ARC-compliant TV with a single HDMI cable, you can output 

the audio and video from this unit to the TV, and also input the audio from the TV 

to this unit.

HDMI Standby Through:

Even if this unit is in standby mode, the input signals from AV components can be 

transmitted to the TV.

Deep Color:

By connecting devices supporting Deep Color, video signals input from the 

devices can be reproduced on the TV with even more colors.

x.v.Color™:

This technology reproduces even more realistic colors by expanding the color 

gamut.

3D:

You can transmit 3D video signals from AV components to the TV.
4K:

This unit supports 4K (3840×2160p) and 4K SMPTE (4096×2160p) video signals.
Lip Sync:

This setting automatically corrects desynchronization between the video and 

audio signals based on the information from the HDMI Lip Sync-compatible TV.

Copyright Protection:

The HDMI jack of this unit conforms to the Revision 1.4 and Revision 2.2 

standards of the HDCP (High-bandwidth Digital Content Protection), a copy 

protection system for digital video signals. Other devices connected to the unit 

must also conform to the HDCP standards.

Summary of Contents for TX-NR585

































































































































Reviews: