background image

6

Features

TX-SR700/700E

Amplifier Features

100 W 

×

 2 (Front)/ 100 W (Center)/ 100 W 

×

  2

(Surround)/ 100 W (Surround Back) at 8 ohms, 20 Hz -
20 kHz, 0.08 % THD (FTC rated)

130 W 

×

 2 (Front)/ 130 W (Center)/ 130 W 

×

 2

(Surround)/ 130 W (Surround Back) at 6 ohms
(DIN)

160 W 

×

 2 (Front)/ 160 W (Center)/ 160W 

×

  2

(Surround)/ 160 W (Surround Back) at 6 ohms
(JEITA)

Wide Range Amplifier Technology (WRAT)

Powered Zone 2 Capability

State-of-the-art linear PCM 192 kHz/24-bit
DACs for L/R channels

Optimum gain volume circuitry

Audio/Video Features

Dolby

®

* Digital, Dolby Digital EX, Dolby Pro

Logic II

DTS, DTS-ES Extended Surround, DTS Neo:6

Non-Scaling Configuration

CinemaFILTER

“Easy-set” speaker configuration

Pure Audio Mode

Crossover Adjustment (80/100/120 Hz)

Onscreen graphical displays

Digital Outputs (1 coaxial, 1 optical)

2 component video inputs and 1 output

3 Assignable digital inputs  (1 coaxial, 2 optical)

5 S-Video inputs and 3 outputs

Front panel A/V, S-Video, Optical inputs

Multi channel input for DVD-Audio

Rec out selector and Zone 2 selector

Pre-out terminals for Front L/R, Center,
Surround L/R, Surround Back, Subwoofer and
Zone 2 L/R

Color-coded speaker terminals

FM/AM Tuner Features

40 FM/AM random presets

FM auto tuning

RDS (European models) with PS/RT/PTY/TP

Other Performance Features

IntelliVolume

Powerful backlit/preprogrammed learning
remote with macro and mode-key LEDs

12V Trigger output for Zone 2

IR input terminal

TX-SR600/600E

Amplifier Features

80 W 

×

 2 (Front)/ 80 W (Center)/ 80 W 

×

 2 (Surround)/

80 W (Surround Back) at 8 ohms, 20 Hz - 20 kHz,
0.08 % THD (FTC rated)

115 W 

×

 2 (Front)/ 115 W (Center)/ 115 W 

×

  2

(Surround)/ 115 W (Surround Back) at  6 ohms (DIN)

145 W 

×

 2 (Front)/ 145 W (Center)/ 145 W 

×

  2

(Surround)/ 145 W (Surround Back) at 6 ohms (JEITA)

Wide Range Amplifier Technology (WRAT)

State-of-the-art linear PCM 192 kHz/24-bit
DACs for L/R channels

Optimum gain volume circuitry

Audio/Video Features

Dolby Digital, Dolby Digital EX, Dolby Pro Logic II

DTS, DTS-ES Extended Surround, DTS Neo:6

Non-Scaling Configuration

CinemaFILTER

“Easy-set” speaker configuration

Crossover Adjustment (80/100/120 Hz)

Onscreen graphical displays

Optical Digital Output

2 component video inputs and 1 output

3 Assignable digital inputs (1 coaxial, 2 optical)

5 S-Video inputs and 2 outputs

Front panel A/V, S-Video, Optical inputs

Multi channel input for DVD-Audio

Pre-out terminal for Subwoofer

Color-coded speaker terminals

A/B speaker drive

FM/AM Tuner Features

40 FM/AM random presets

FM auto tuning

RDS (European models) with PS/RT/PTY/TP

Other Performance Features

IntelliVolume

Preprogrammed learning remote with macro and
mode-key LEDs

* Manufactured under license from Dolby Laboratories.

“Dolby,”  “Pro Logic,” and the double-D symbol are trademarks of
Dolby Laboratories.

• “DTS,” “DTS-ES Extended Surround,” and “Neo:6” are trademarks of

Digital Theater Systems, Inc.

• Xantech is a registered trademark of Xantech Corporation.

• Niles is a registered trademark of Niles Audio Corporation.

Summary of Contents for HT-SR700

















































































Reviews: