65
Using remote controller
Controlling an Onkyo DVD player
The
connector of the Onkyo DVD player must be connected to
the TX-SR700/700E/600/600E (see page 29).
1. Press the DVD MODE button.
The DVD MODE button lights green (RC-482M) or red (RC-480M).
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control an Onkyo DVD player.
Operation buttons:
ON:
Turns DVD player on and off
STANDBY:
Turns DVD player off (Some sets may not respond to
this button. In this case, use the ON button to put the DVD player in
the standby state.)
SETUP:
Displays OSD Menu of the DVD player
:
Moves cursor in the OSD Menu of the DVD player
ENTER:
Enter button for the OSD Menu of the DVD player
RETURN:
Return button for the OSD Menu of the DVD player
TOP MENU or MENU:
Displays menu screens recorded on DVD
media
DISC
:
Selects disc in DVD changer
AUDIO SEL:
Selects audio or language track (if recorded on the
DVD)
ANGLE:
Selects camera angle (if recorded on the DVD)
SUBTITLE:
Selects subtitle language (if recorded on the DVD)
SEARCH:
Searches for location on disc to start playback
RANDOM:
Random playback
:
Chapter/Track down
:
Chapter/Track up
:
Play
:
Stop
:
Fast reverse
:
Fast forward
:
Pause
OPEN/CLOSE :
Opens/closes disc tray
0, 1 to 9, +10:
Numeric keys
You may also use the following buttons:
VOL
:
Adjusts volume at TX-SR700/700E/600/600E
MUTING:
Activates muting function at TX-SR700/700E/600/
600E
Note:
When operating an Onkyo DVD player directly with the remote
controller without connecting the
terminals, pre-programming is
necessary (see page 67).
DVD
operation
buttons
Numeric keys
VOL
MUTING
ON
STANDBY
DVD MODE
SUBTITLE
TOP MENU
RETURN
AUDIO SEL
ANGLE
ENTER,
SEARCH
SETUP
MENU
DISC
