Onkyo HT-S6300, Instruction Manual

Page: 54 / 76

54
En
If you’ve connected your Zone 2 speakers to the AV
receiver, as explained in “Connecting Your Zone 2 Speak-
ers Directly to the AV receiver” (
➔
53 ), you must set the
“ Front High / Zone2 ” setting to “ Zone2 ”.
Main menu Speaker Setup
Note
• When “ Zone2 ” is selected and Zone 2 turned on, the Zone 2
speakers connected to the FRONT HIGH OR ZONE 2
SPEAKERS terminals output sound, but the surround back or
front high speakers connected to the SURR BACK OR
FRONT HIGH SPEAKERS terminals do not. When “ Zone2 ”
is selected and Zone 2 turned off, the surround back or front high
speakers output sound as normal.
• When the “ Front High / Zone2 ” setting is set to “ Zone2 ” and the
input selector of Zone 2 is selected, power consumption on
standby mode slightly increases.
This section explains how to turn Zone 2 on and off, how
to select an input source for Zone 2, and how to adjust the
volume for Zone 2.
Controlling Zone 2 from the AV receiver
Note
• While Powered Zone 2 is being used, listening modes that
require surround back and front high speakers (6.1/7.1), such as
Dolby Digital EX, DTS-ES, and Dolby Pro Logic IIz Height are
unavailable.
• When the “ Front High / Zone2 ” setting is set to “ Zone2 ” and the
input selector of Zone 2 is selected, power consumption on
standby mode slightly increases.
Setting the Powered Zone 2
1
In the “Speaker Setup” menu, select “Speaker
Settings”, and then press
ENTER .
2
Use q / w to select “Front High/Zone2” and e / r to
select “Zone2”.
`
Zone2 :
Zone 2 speakers can be used (Powered Zone 2
enabled).
Using Zone 2
1
To turn on Zone 2 and select an input source, press
ZONE 2 followed by an input selector button
within 8 seconds.
Zone 2 turns on, the ZONE 2 indicator lights.
To select AM or FM, press the
TUNER
input selec-
tor button repeatedly.
To select the same source as that of the main room,
press
ZONE 2 repeatedly until “ Z2 Selector:
Source ” appears on the display.
Note
• You cannot select different AM or FM radio stations for
your main room and Zone 2. The same FM/AM radio sta-
tion will be heard in each room.
2
To turn off Zone 2, press OFF .
OFF ZONE 2 – /+
ZONE 2 indicator Input selector buttons