background image

 

33

 

Turning On the AV Receiver

ON/STANDBY

STANDBY

PURE AUDIO

CINEMA

FILTER

TONE

MOVIE/TV

MUSIC

GAME

DISPLAY

RT/PTY/TP MEMORY

CLEAR

DIGITAL INPUT

TUNING MODE

LATE NIGHT

PHONES

MULTI CH

PURE AUDIO

DVD

VCR/DVR

CBL/SAT

AUX

TAPE

TUNER

CD

SETUP

SETUP MIC

VIDEO

L     AUDIO    R

AUX INPUT

ENTER

RETURN

TUNING

PRESET

MASTER VOLUME

AV RECEIVER

   

HT-R518

ON/STANDBY

RECEIVER

ON/STANDBY

STANDBY indicator

 

Turning On and Standby

 

On the AV receiver, press the [ON/STANDBY] button.

On the remote controller, press the [RECEIVER] REMOTE MODE button, 
followed by the [ON/STANDBY] button.

 

The AV receiver comes on, the display lights up, and the STANDBY indicator goes off.

To turn the AV receiver off, press the [ON/STANDBY] button, or press the remote 
controller’s [ON/STANDBY] button. The AV receiver will enter Standby mode. To 
prevent any loud surprises the next time you turn on the AV receiver, turn down the 
volume before you turn it off.

ON/STANDBY

Remote

controller

AV receiver

or

Up and Running in a Few Easy Steps

To get your system up and running with the minimum of fuss, here’s a few pointers to help you configure the AV 
receiver before you use it for the very first time. These settings only need to be made once.

Do the automatic speaker setup—this is essential!

See “Automatic Speaker Setup (Audyssey 2EQ)” on page 34.

Did you connect a component to an HDMI input, 
component video input, or digital audio input?

If you did, see “HDMI Input Setup” on page 36, “Component Video 
Input Setup” on page 37, or “Digital Input Setup” on page 37 respec-
tively.

Did you connect an Onkyo MD recorder, CD recorder, or RI 
Dock?

If you did, see “Changing the Input Display” on page 38.

OPTICAL

COAXIAL

Y

P

B

P

R

HDMI

OUT

IN

TAPE

MD recorder, CD recorder, 
RI Dock

HT-R518_En.book Page 33 Tuesday, March 11, 2008 11:31 AM

Summary of Contents for HT-R518

















































































Reviews: