Onkyo HT-R518 Instruction Manual Download Page 48

Page: 48 / 80

Using the Listening Modes

For a description of each listening mode, see “About the
Listening Modes” on page 52.

Selecting on the AV Receiver

■

[PURE AUDIO] button

This button selects the Pure Audio listening mode.
When this mode is selected, the AV receiver’s dis-
play is turned off and only the HDMI outputs output
video signals. Pressing this button again will select
the previous listening mode.

■

[MOVIE/TV] button

This button selects the listening modes intended for
use with movies and TV.

■

[MUSIC] button

This button selects the listening modes intended for
use with music.

■

[GAME] button

This button selects the listening modes intended for
use with video games.

Selecting with the Remote Controller

■

[MOVIE/TV] button

This button selects the listening modes intended for
use with movies and TV.

■

[MUSIC] button

This button selects the listening modes intended for
use with music.

■

[GAME] button

This button selects the listening modes intended for
use with video games.

■

[STEREO] button

This button selects the Stereo listening mode.

Selecting the Listening Modes

• The Dolby Digital and DTS listening modes

can only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (coaxial, optical, or HDMI).

• The listening modes you can select depends

on the format of the input signal. To check
the format, see “Displaying Source Informa-
tion” on page 41.

• While a pair of headphones is connected,

you can only select the Pure Audio, Mono,
Direct, or Stereo listening mode.

ON/STANDBY

STANDBY

PURE AUDIO

CINEMA

FILTER

TONE

MOVIE/TV

MUSIC

GAME

DISPLAY

RT/PTY/TP MEMORY

CLEAR

DIGITAL INPUT

TUNING MODE

LATE NIGHT

PHONES

MULTI CH

PURE AUDIO

DVD

VCR/DVR

CBL/SAT

AUX

TAPE

TUNER

SETUP

SETUP MIC

VIDEO

L AUDIO R

AUX INPUT

ENTER

RETURN

TUNING

PRESET

MASTER VOLUME

AV RECEIVER

HT-R518

PURE AUDIO

GAME

MOVIE/TV

MUSIC

STEREO

GAME

MOVIE/TV

MUSIC

HT-R518_En.book Page 48 Tuesday, March 11, 2008 11:31 AM

Summary of Contents for HT-R518

















































































Search results

Summary of Contents for HT-R518

Reviews:

Related manuals for HT-R518

Brands by name

Popular brands

Onkyo HT-R518, Instruction Manual

Search results

Summary of Contents for HT-R518

Reviews:

Related manuals for HT-R518

Brands by name

Popular brands