68
Troubleshooting
—Continued
• Replace both batteries with new ones.
(Do not mix different types of batteries or new and old batteries.)
11
• The distance between the remote controller and the unit may be too far.
Or, there may be an object between them.
11
• The remote control sensor on the unit may be receiving a strong beam of light
(inverter fluorescent light or sunlight).
11
• The unit is placed behind the tinted windows of the audio rack or entertainment center.
11
• Make sure that the TV code has been programmed in the remote controller correctly.
Find the TV’s remote control code in the remote control list and reprogram it.
64
• If you have connected an external component, set the input indication correctly.
32
You cannot record.
• To perform digital recording, connect the digital output of the playing component to the digital input of the recording
component.
• Make sure that all system components are connected correctly.
• Make sure that the input source setting (analog or digital) on the recording player is correct.
• Make sure that the system is connected correctly.
19–25
The
system functions do not work.
• Make sure that the
cable and audio connection cables are connected correctly.
(Connecting only the
cable does not complete the system connection.)
27
• Switch the input source indication correctly.
32
Timer playback or recording does not work.
• The clock should be set correctly.
If the clock is not set, timer playback or recording does not work. Make sure you program the current time.
52
• When the power is turned on, make sure that the unit displays “TIMER.”
• Make sure that the
cable and audio connection cables are connected correctly.
27
• Check the settings of the playback and recording components. (You cannot perform timer recording with a CD
recorder.)
The colors of the TV picture bleed.
• Locate the speakers far from the TV.
You are unable to set the correct speaker distance.
• The distance value may be corrected to a value suitable for the home theater environment.
The maximum volume available does not exceed 96 (or does exceed 97).
• After you adjust the balance speaker volume levels, the maximum volume setting may change.
System connection with other components
Others
This product uses a micro computer to perform various advanced functions. However, noise, radio interfer-
ence, or static electricity could occasionally cause the unit to malfunction. In this case, unplug the power
cable from the AC outlet, then plug it in again in five seconds.
Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the
unit’s malfunction. Before you record important data, make sure that the material will be recorded correctly.
Restoring the factory default settings:
To reset all the stored settings to the factory default conditions, while the power to the PR-155X is on, press
and hold down the INPUT on the unit, and press STANDBY/ON. The unit displays “CLEAR,” and restores the
factory default settings, then enters Standby mode.
HTC-V10X_En.book Page 68 Wednesday, July 21, 2004 2:49 PM
