39
Enjoying the Surround Sound
—Continued
■
Adjusting each speaker’s relative volume
balance temporarily
You can adjust the relative volume of each speaker.
• For information on the SWA-V10X subwoofer setting, refer
to page 40.
• This adjustment is cancelled when the PR-155X enters
standby mode.
• During multi channel playback, this adjustment is retained
even if the PR-155X enters standby mode.
■
Using the Late Night function (only for Dolby Digital discs)
LATE NIGHT
2
1,3
During playback, press CH SEL on the remote controller
to select the speaker you wish to adjust.
L:
Front left speaker
C:
Center speaker
R:
Front right speaker
SR:
Surround right speaker
SL:
Surround left speaker
SW:
Subwoofer
Press
▲
/
▼
on the remote controller to adjust the volume
level of the selected speaker.
Pressing
▲
increases the level, and pressing
▼
decreases the level.
You can set the level in the range of –12 to +12. You can set the
subwoofer level in the range of –30 to +12.
Press CH SEL.
If you press CH SEL while the subwoofer is selected, the unit dis-
plays the standard screen.
1
2
3
This function enables you to narrow the dynamic range of Dolby Digital sound. If you
lower the volume, for example, to watch a movie late at night, this function will enable you
to hear soft sounds more clearly.
This function is cancelled when you place the PR-155X in Standby mode.
Press LATE NIGHT.
Each press of LATE NIGHT toggles between ON and OFF.
Notes:
• The Late Night function is effective only for Dolby Digital discs.
• The effect of the Late Night function varies depending on the Dolby
Digital sound source. Some sources may produce little or no effect.
HTC-V10X_En.book Page 39 Wednesday, July 21, 2004 2:49 PM
