24
Programming AM/FM Stations One by One — Preset Write
You can store the frequencies of stations one by one manually into the preset memory chan-
nels. This is useful when you want to program the stations in your favorite order.
Turn on the power to the unit before you start the procedure.
1
3
3-6
DISPLAY
• You can preset up to 30 channels including
both FM and AM stations. For example, if you
have already stored FM stations to eight
channels, you can use 22 channels to store
preset AM stations.
• Programmed FM and AM stations are indi-
cated separately. Therefore, one of the pre-
set FM stations and one of the preset AM
stations could use the same channel num-
ber.
• The Preset Write function enables you to
store radio station frequencies to any chan-
nel number. For example, you could program
three AM stations to channels 2, 5, and 9.
Before auto presetting
1
Press INPUT
/
to display “AM.”
Press again to select “FM” to store an
FM station.
2
Press the remote controller’s
/
to tune in the radio station
you wish to preset.
If you hold down either of the buttons,
the frequency keeps changing.
3
Press
EDIT
/NO/CLEAR and turn
MULTI JOG until “Preset Write?”
appears in the display.
SOURCE
SOURCE
4
Press MULTI JOG.
The channel number to be preset flashes.
To cancel presetting, press EDIT/NO/
CLEAR instead.
5
If you wish to change the channel
number, turn MULTI JOG.
6
Press MUTLI JOG to confirm.
If “Complete” appears
The radio station is registered to the
preset channel.
SOURCE
CH
SOURCE
CH