23
Playing an MD—Continued
Press DISPLAY on the unit repeatedly to change the display as follows:
Changing the display information
Using the remote controller
DISC
SP
SOURCE
SP
SP
DISC
REMAIN
DISC
NAME
• While the MD is stopped
Total number
of tracks
Total playing
time
“DISC REMAIN”
is lit while the remain-
ing recordable time on
the disc is displayed.
“DISC NAME”
is lit while the disc
name is displayed.
Disc name
*3
Total number
of tracks
The remaining
recordable time
*2
“DISC”
is lit while the disc infor-
mation is displayed.
Current Record Mode
SP
TRACK
ELAPSED
TRACK
REMAIN
SP
SP
TRACK
NAME
SOURCE
SOURCE
*1 If the MD is not recorded, “MD BlankDisc” appears in the
display.
*2 If you insert an MD produced only for playback, this infor-
mation will not appear.
*3 If the disc or tracks are not named, only the total number
of tracks or the track number appears in the display.
See “Naming an MD and its tracks, and preset channels”
on page 52.
• During playback or pause
The elapsed time of
the playing track
The remaining time
of the playing track
The name of
the playing track
*3
“TRACK ELAPSED”
is lit while the elapsed
time of the playing track
is displayed.
“TRACK NAME”
is lit while the name of
the playing track is dis-
played.
“TRACK REMAIN”
is lit while the remain-
ing time of the playing
track is displayed.
*1
If the disc or song title is long:
You can scroll long names across the display by pressing
SCROLL on the remote controller.
Mode in which disc
was recorded
Press to switch the source
to MD.
Press to scroll a long name
across the display.
Adjust the volume level.
Press VOLUME to raise the
level and VOLUME to lower
the level.
The track
to play
represents the tens digit.
8
10
34
103
,
,
Press
,
,
,
Press to select the track to
play.
Press to stop playback.
• Press to locate the beginning of
the playing or paused track. Press
repeatedly to select the previous
tracks in reverse order.
• To select the next track in order,
press repeatedly.
Press and hold to fast-forward,
and to fast-reverse during
playback or in pause mode until you
locate the desired point.
8
10/0
4
3
--/---
1
--/---
--/---
3
0
--/---
Press the number buttons as
described in the examples
below to play back the
desired track.
Press to play.
If the MD is in the unit, playback starts.
If the unit is in Standby mode, it turns
on automatically.
Press to locate a particular
point in a track.
Press to pause.
To resume playback, press Pause ( )
or MD .