![background image](http://html.mh-extra.com/html/onkyo/29400021/29400021_instruction-manual_1637357088.webp)
88
Advanced Setup
—Continued
THX Audio Setup
This setting is
not
set automatically by Audyssey MultEQ
®
Room Correction and Speaker Setup (see page 54).
With the “SurrBack Sp Spacing” setting, you can specify the distance between your surround back speakers.
If you’re using a THX-certified subwoofer, set the “THX Ultra2/Select2 Subwoofer” setting to “Yes”. You can then
apply THX’s Boundary Gain Compensation (BGC) to compensate the perceived exaggeration of low frequencies for
listeners sitting very close to a room boundary (i.e., wall).
You can also set the THX Loudness Plus. When the “Loudness Plus” is set to “On”, it is possible to enjoy even subtle
nuances of audio expression at low volume.
This result is only available when the THX listening mode is selected.
SurrBack Sp Spacing
< 1ft (< 0.3m):
Select this if your surround back speakers are between 0 and 1 foot (0–30 cm) apart.
1 ft – 4 ft (0.3 m – 1.2 m):
Select this if your surround back speakers are between 1 and 4 feet (0.3–1.2 m) apart.
> 4ft (> 1.2m)
(default)
:
Select this if your surround back speakers are more than 4 feet (1.2 m) apart.
Note:
Cannot be set if “Surr Back Ch” is set to “1ch” (page 85), “Speakers Type(Front)” is set to “Bi-Amp” (page 51),
“Surr Back” is set to “None” (page 85), or Powered Zone 2 is being used (page 118).
THX Ultra2/Select2 Subwoofer
No:
Select this if you do not have a THX-certified subwoofer.
Yes:
Select this if you have a THX-certified subwoofer.
Note:
If the “Subwoofer” setting is set to “No”, this setting cannot be selected (page 85).
BGC
Off:
Select this to turn off BGC.
On:
Select this to turn on BGC.
Note:
This setting is only available if “THX Ultra2/Select2 Subwoofer” is set to “Yes”.
Loudness Plus
Off
: Select this to turn off Loudness Plus.
On
: Select this to turn on Loudness Plus (default).
Preserve THX Settings
Yes:
Audyssey Dynamic EQ™ / Audyssey Dynamic Volume™ will not be active in
THX listening mode.
No:
Audyssey Dynamic EQ / Audyssey Dynamic Volume will be active in THX lis-
tening mode depending on the setting.
Note:
This setting is fixed at “Yes” if “Loudness Plus” is set to “On”.
THX Loudness Plus
THX Loudness Plus is a new volume control technology featured in THX Ultra2 Plus™ and THX Select2 Plus™
Certified receivers. With THX Loudness Plus, home theater audiences can now experience the rich details in a
surround mix at any volume level. A consequence of turning the volume below Reference Level is that certain
sound elements can be lost or perceived differently by the listener. THX Loudness Plus compensates for the tonal
and spatial shifts that occur when the volume is reduced by intelligently adjusting ambient surround channel levels
and frequency response. This enables users experience the true impact of soundtracks regardless of the volume
setting. THX Loudness Plus is automatically applied when listening in any THX listening mode. The new THX
Cinema, THX Music, and THX Games modes are tailored to apply the proper THX Loudness Plus settings for
each type of content.
TX-NR807_En.book Page 88 Tuesday, July 28, 2009 12:00 PM
Summary of Contents for 29400021
Page 147: ...147 Memo ...