![background image](http://html.mh-extra.com/html/onkyo/29400021/29400021_instruction-manual_1637357049.webp)
49
First Time Setup
—Continued
Component Video Setup
If you connect to a COMPONENT VIDEO IN, you must
assign it to an input selector. For example, if you connect
your DVD/BD player to COMPONENT VIDEO IN 2,
you should assign it to the DVD/BD input selector.
(TX-NR807)
If you’ve connected your TV to the AV receiver with a
component video cable, you can set the AV receiver so
that composite video and S-Video sources are
upconverted
*
and output by the COMPONENT VIDEO
MONITOR OUT
*1
. You can set this for each input
selector by selecting the “- - - - -” option.
*1
Only when “Monitor Out” setting is set to “Analog”.
Notes:
•
(TX-NR807)
For composite video and S-Video
upconversion for the COMPONENT VIDEO
MONITOR OUT, the “Monitor Out” setting must be
set to “Analog” (see page 46), and the “Component
Video Input” setting must be set to “- - - - -”. See
page 27 for more information on video signal flow and
upconversion.
•
(TX-NR807)
If not connected to HDMI OUT, the
“Monitor Out” setting will be automatically switched
to “Analog” (see page 28).
• If you connect an input component (such as UP-A1
series Dock that seated iPod) to the UNIVERSAL PORT
jack, you cannot assign any input to PORT selector.
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
Input selector
Default assignment
DVD/BD
IN1
VCR/DVR
- - - - -
CBL/SAT
IN2
GAME
- - - - -
AUX
- - - - -
TV/TAPE
- - - - -
TUNER
- - - - - (Fixed)
CD
- - - - -
PHONO
- - - - -
PORT
- - - - -
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [
q
]/[
w
] but-
tons to select “1. Input/Output
Assign”, and then press
[ENTER].
The “Input/Output Assign” menu
appears.
IN
OUT
Composite video, S-Video
Composite video, S-Video
Component video
Component video
1. Input/Output
Assign
1. Monitor
Out
2. HDMI
Input
3. Component Video Input
4. Digital Audio Input
3
Use the Up and Down [
q
]/[
w
] but-
tons to select “3. Component
Video Input”, and then press
[ENTER].
The “Component Video Input” menu
appears.
4
Use the Up and Down [
q
]/[
w
] but-
tons to select an input selector,
and then use the Left and Right
[
e
]/[
r
] buttons to select:
IN1:
Select if the video component
is connected to COMPO-
NENT VIDEO IN 1.
IN2:
Select if the video component
is connected to COMPO-
NENT VIDEO IN 2.
- - - - -:
Select if you are using the
HDMI OUT, rather than the
COMPONENT VIDEO
OUT, for the output from
composite video, S-Video,
and component video
sources.
5
Press the [SETUP] button.
The setup menu closes.
1–3. Component Video Input
IN1
- - - - -
IN2
- - - - -
- - - - -
DVD/BD
VCR/DVR
CBL/SAT
GAME
AUX
TX-NR807_En.book Page 49 Tuesday, July 28, 2009 12:00 PM
Summary of Contents for 29400021
Page 147: ...147 Memo ...