Onfloor Propel, Operating Manual

Page: 21 / 90

OPERATION
8. Place the release cable into the channel,
and replace the hopper release T-handle
into its retaining clip.
9. Raise the sweeper enough so that the
lowered hopper will clear the top of
the debris container.
10. Slowly back the sweeper away from
the debris dumping site.
FOR SAFETY: When using machine,
use care when driving in reverse.
11. Slowly lower the sweeper until the
low end of the hopper is approximately
30.5cm (12 in) above the ground.
12. While slowly moving the sweeper
forward, lower the sweeper the
remaining distance to the ground.
NOTE: Failure to move the forklift
forward while lowering the hopper
may cause damage to the hopper lip
skirts.
13. Dismount the forklift.
FOR SAFETY: Before leaving the
forklift, stop on a level surface, set
the forklift parking brake, turn off
the forklift and remove the key.
14. Push down the hopper latch lever until
the hopper locks into the “sweeping”
position.
19