Onfloor Propel, Operating Manual

Page: 19 / 90

OPERATION
1. Slowly move the sweeper forward until the sweeper
is positioned over the debris container or debris
dumping site.
2. Pull and Push the filter shaker knob
to clean the hopper dust filter. Return
the knob to the full-in storage position.
3. Slowly raise the sweeper until the tires
of the sweeper just clear the debris
container, or, if there is no container,
raise the sweeper until the bottom of
the sweeper is approximately 1meter
(three ft.) above the debris dumping site.
FOR SAFETY: Do not raise the sweeper off
of the ground unless the body of the sweeper
is in line and centered with the fork tube.
FOR SAFETY: When using machine,
Make sure adequate clearance is available
before raising sweeper.
FOR SAFETY: Before leaving the
forklift, stop on a level surface, set
the forklift parking brake, turn off
the forklift and remove the key.
EMPTYING THE HOPPER
#/22%#4
).#/22%#4
17