Cloth Filter
Installation:
The filter assembly in
this vacuum
MUST
be
correctly installed to
avoid damaging the cloth
filter and to make sure
the vacuum will maintain
its efficiency.
1)
When installing the cloth filter assembly, the
flat side of the cloth must sit in the tank as shown
above so it does not interfere with the tank inlet.
Cloth Filter Maintenance:
In order to maintain maximum efficiency of the
vacuum cleaner it is important to clean the cloth
filter each time the tank is emptied.
1)
Remove the wire filter frame from the cloth fil-
ter and set aside.
2)
Shake off loose particles and brush exposed sur-
face with a soft bristle brush or carefully vacuum
off the particles.
3)
Reassemble the wire filter frame to the cloth fil-
ter and place filter assembly in tank as shown.
NOTE: DO NOT WASH
the cloth filter, shrinkage to
the cloth and damage to the gasket can occur.
To insure a snug fit, make sure that the area around the lid and top edge
of the filter assembly’s vinyl sealing gasket is free of dirt and other foreign matter.
C
AUTION
:
This vacuum has been specifically designed to
clean up concrete dust. Special filters reduce the
incidence of airborne dust that would be created
by other methods of cleaning.
DO NOT
at any time attempt to substitute,
remove, bypass filters in the vacuum.
When installing a new filter use only the manufac-
turer’s approved vacuum filter.
Before attempting to use or before cleaning with
this vacuum, be sure that you fully understand the
instructions for installing or cleaning the filter.
DO NOT
use this unit until the owner’s manual has
been read. Improper use could cause damage to
the vacuum or special filters employed.
1)
Remove vacuum, casters and attachments from
the shipping carton and set aside.
2)
Carefully remove the hose cage, motor head,
and filter assembly. Set aside.
3)
Turn the tank upside down. Insert casters into
caster mounts and press down to lock in place.
Return tank to the upright position.
4)
Replace filter assembly, motor head and hose
cage.
NEVER operate the vacuum cleaner without the filter assembly properly installed.
Motor damage, lose of operating efficiency and re-circulation of material into
the work area will take place.
C
AUTION
:
I
NTENDED
U
SE
O
F
T
HIS
V
ACUUM
A
SSEMBLY
I
NSTRUCTIONS
F
ILTER
I
NSTALLATION
P
P
A
AG
GE
E
4
4
