PROBLEM: Loss of Vacuum.
POSSIBLE CAUSE:
POSSIBLE SOLUTION:
1. Dry filter assembly clogged.
1. Use the filter shaker or clean cloth filter
(See page 4 - Cloth Filter Maintenance).
2. Clogged hose or wand.
2. Remove obstruction.
3. Tank rim damaged.
3. Replace tank.
4. Loose or broken fan.
4. Contact manufacturer or service center.
5. Motor not working.
5. Contact manufacturer or service center.
6. Gasket worn.
6. Replace gasket.
PROBLEM: Motor is not running.
POSSIBLE CAUSE:
POSSIBLE SOLUTION:
1. Broken switch.
1. Contact manufacturer or service center
2. Power cord defective.
2. Contact manufacturer or service center.
3. Motor defective.
3. Contact manufacturer or service center.
4. Blown fuse or tripped circuit breaker.
4. Replace fuse or reset circuit breaker.
at the wall panel.
Always disconnect power cord before servicing the vacuum.
C
AUTION
:
Repairs should only be performed by an authorized service center.
W
ARNING
:
P
P
A
AG
GE
E
8
8
PN 225878 - DYN812D & DYN1012D Vacuum Manual - Printed in USA 05/01/07
®
T
ROUBLE
S
HOOTING
G
UIDE
We warrantee to the original purchaser this vacuum
cleaner against defects in material and workmanship
for a period of 1 year, motor and steel tank 2 years
from the date of delivery. Please note the following
conditions pertaining to this warranty.
1)
Applies only to the original owner and is not trans-
ferable.
2)
Machine will not have been dismantled or tampered
with in any way.
3)
Normal wear items will be warranted from manufac-
turing defects for up to 90 days from date of purchase
including the following items, but not limited to:
Accessories; Belts; Bearings; Capacitors; Carbon
Brushes; Casters; Electric Cords; Finishes;
Filters; Floats; Switches; and the like.
4)
This warranty does not apply to any repair arising by
reason of misuse, neglect, abuse, or to proprietary
parts.
5)
This warranty is in lieu of and excludes every con-
dition or warranty not herein expressly set out and all
liability for any form of consequential loss or damage
is hereby expressly excluded.
6)
This Warranty is limited to repair or replacement of
covered components and reasonable labor expenses.
Warranty Registration:
It is purchaser’s responsibility to fill out the warranty
card included in the manual package and mail it to
Onfloor. This will register your purchase and start your
warranty. Failure to send us this card in one week upon
receipt of the machine may void the warranty.
DYN-812D & 1012 W
ARRANTY
& R
EGISTRATION
