background image

MICROFLASH 4T PRINTER USER'S GUIDE

17

Supplies

Use only supplies certified by the Original Equipment 
Manufacturer (OEM). For OEM supplies, please contact 
O’Neil at (949) 458-0500.

Media Supplies

O'Neil Product Development, Inc. offers seven certified 
grades of paper for use in the printers. Our certified 
supplies are guaranteed compatible — this important 
qualification means that rigorous performance and image 
life testing have been performed. Quality supplies are key 
to obtaining optimal image quality and print performance. 
Quality supplies are also the key to extending the life of 
the printer. O'Neil Product Development strongly 
recommends using O'Neil Certified Supplies only.
For more information, contact O'Neil Printer Supplies 
Group at (949) 458-6400.

Maintenance Supplies

We recommend that you follow a regular maintenance 
schedule using our cleaning card (or cleaning kit when 
using linerless labels). O'Neil's cleaning cards are designed 
to effectively remove dirt and other contaminants from the 
thermal printhead, rollers, and paper path...resulting in a 
clean, crisp image output — every time. Our cleaning kits 
remove any adhesive residue (when using linerless labels) 
in addition to dirt and other contaminants.
For more information, contact O'Neil Printer Supplies 
Group at (949) 458-6400.

For more information

For information about using the printer, contact O'Neil at 
(949) 458-0500, or visit wsww.oneilprinters.com.

Summary of Contents for MF4T























Reviews: