Oneil MF4T, User Manual

Page: 16 / 22

MICROFLASH 4T PRINTER USER'S GUIDE
13
Using External Charging
Overview
External charge-capable printers have two charging
contact points located on the back of the printer's case
(Figure 12). External charge-capable printers can be
used with various O'Neil accessories such as the swivel
lock bracket and the external swivel lock depot charger.
When an external charge-capable printer is mounted to
one of these accessories, the printer's batteries are
automatically charged. For more information, see the
instruction sheet(s) included with the accessories.
Note:
T
he following information applies to printers
installed with external charge capabilities.
Warning: Use of any product not approved by O'Neil
Product Development, Inc. for use with their printers
could cause damage to the batteries and/or printer
and will void the warranty.
Failure to observe the instructions and/or warnings
specified in the documentation may result in damage
to your printer. O'Neil Product Development, Inc. does
not accept liability for resulting damages or injuries.
Figure 12
(2) Charging contact points