One Talk T41P IP User Manual Download

Page: 23 / 26

CONTENTS

One Talk

—T41P IP desk phone guide

User guide

1. This device may not cause harmful

interference.

2. This device must accept any interference

received, including interference that may

cause undesired operation.

Class B digital device or peripheral

Note: This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment generates,

uses and can radiate radio frequency energy and,

if not installed and used in accordance with the

instructions, may cause harmful interference to

radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is encouraged

to try to correct the interference by one or more

of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the

equipment and receiver.

3. Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

4. Consult the dealer or an experienced radio/TV

technician for help.

Important safety precautions

Please read the following important safety

notices and instructions before installing or using

the product.
• A DANGER warning refers to situations that

could cause bodily injury.

• A CAUTION warning refers to situations

that could result in equipment malfunction

or damage.

1. Follow all warnings and instructions marked on

the product.

2. Unplug this product from the wall outlet

before cleaning.
Do not use liquid cleaners or aerosol cleaners.

Use an antistatic cleaning pad for cleaning.

3. Do not use this product near water.

4. Do not place this product on an unstable cart,

stand or table. If the product falls, it could be

seriously damaged.

5. This product should be operated using the

type of power indicated on the marking

label. If you are not sure of the type of power

available, consult your dealer or local

power company.

6. Do not allow anything to rest on the power

cord. Do not locate this product where people

will walk on the cord.

7. Never push objects of any kind into this

product through cabinet slots as they

may touch dangerous voltage points or

short-out parts that could result in a fire or

electric shock.

8. Never spill liquid of any kind into or onto

the product.

9. Do not attempt to service this product

yourself, as opening or removing covers may

expose you to dangerous voltage points or

other risks.

10. Refer all questions regarding servicing of this

product to qualified service personnel.

Danger–electric shock and fire

Electric current from power, telephone and

communication cables is hazardous and could

result in electric shock and/or fire.

Learn more.

For more information, visit

www.onetalk.com

Summary of Contents for T41P IP



























Search results

Summary of Contents for T41P IP

Reviews:

Related manuals for T41P IP

Brands by name

Popular brands

One Talk T41P IP, User Manual

Search results

Summary of Contents for T41P IP

Reviews:

Related manuals for T41P IP

Brands by name

Popular brands