6. NTP server address
NOTE:
If a Safeguard for Privileged Passwords Appliance is going to be used for
both Privileged Passwords and the sessions module, you need this network
interface information for both the appliance and the embedded sessions
module.
7. One Identity Safeguard for Privileged Passwords licenses
NOTE:
One Identity Safeguard for Privileged Passwords ships with the following
modules, each requiring a valid license to enable functionality:
l
Privileged passwords
l
Embedded sessions module
NOTE:
If you purchased One Identity Safeguard for Privileged Passwords, the
appropriate license files should have been sent to you via email. If you have not
received an email or need it to be resent, visit
https://support.oneidentity.com/contact-us/licensing
. If you need to request a trial
key, please send a request to
or call +1-800-306-9329.
Step 3: Rack the appliance
Prior to installing the racks for housing the appliance, see
Step 4: Power on the appliance
Prior to powering up the appliance, see
Standardized warning statements for AC systems
The One Identity Safeguard for Privileged Passwords 2000 Appliance includes dual power
supplies for redundant AC power and added reliability.
1. Plug the power cords to the power supply sockets on the appliance back and then
connect the cords to AC outlets.
TIP:
As a best practice, connect the two power cords to outlets on different
circuits. One Identity recommends using an UPS on all appliances.
2. Press the
Green check mark
button on the front panel of the appliance for NO more
than one second to power on the appliance.
CAUTION:
Once the Safeguard for Privileged Passwords Appliance is
booted, DO NOT press and hold the Green check mark button. Holding
this button for four or more seconds will cold reset the power of the
appliance and may result in damage.
You can use the
Red X
button to shut down the appliance. Once the Safeguard for
Privileged Passwords Appliance is booted, press and hold the
Red X
button for four
seconds until it displays POWER OFF.
NOTE:
If the Safeguard for Privileged Passwords Appliance is not yet booted, it
may be necessary to press the
Red X
button for up to 13 seconds.
Safeguard for Privileged Passwords Appliance Setup Guide
Setting up the appliance
10
