manualshive.com logo in svg

H3C SecPath M9006, Manual, Page: 1 / 90

Share
Download
H3C SecPath M9006 Manual Download Page 1

i 

Contents 

Preparing for installation ···································································· 1

 

Safety recommendations ············································································································· 1

 

General safety recommendations ··························································································· 1

 

Electricity safety ·················································································································· 1

 

Handling safety ··················································································································· 1

 

ESD prevention ··················································································································· 2

 

Laser safety ······················································································································· 2

 

Examining the installation site ······································································································· 2

 

Weight support ··················································································································· 2

 

Temperature ······················································································································ 2

 

Humidity ···························································································································· 2

 

Cleanliness ························································································································ 3

 

EMI ·································································································································· 3

 

Grounding ·························································································································· 4

 

Power ······························································································································· 4

 

Cooling ····························································································································· 4

 

Space ······························································································································· 5

 

Installation tools ························································································································· 6

 

Installing the gateway ········································································ 8

 

Confirming installation preparations ······························································································· 8

 

Attaching slide rails to the rack ······································································································ 8

 

Installing cage nuts for attaching mounting brackets ································································· 11

 

Attaching cable management brackets and mounting brackets to the chassis ······································· 11

 

Installing cable management brackets ··················································································· 11

 

Installing mounting brackets ································································································ 13

 

(Optional) Installing air filters ······································································································ 13

 

Attaching air filters to an M9006/M9014 gateway ······································································ 14

 

Attaching air filters to an M9010/M9010-GM gateway ································································ 14

 

Mounting the gateway in the rack ································································································ 15

 

Grounding the gateway ············································································································· 16

 

Installing FRUs ························································································································ 17

 

Attaching an ESD wrist strap ······························································································· 17

 

Installing a card ················································································································· 18

 

Installing a power module ···································································································· 19

 

Installing an XFP/SFP+/SFP/QSFP+ transceiver module ··························································· 20

 

Installing a CFP module ······································································································ 21

 

Connecting networking cables ···································································································· 21

 

Connecting twisted pair cables ····························································································· 21

 

Connecting optical fibers ····································································································· 22

 

Connecting power cords ············································································································ 22

 

Connecting an AC power cord ······························································································ 23

 

Connecting a DC power cord ······························································································· 23

 

Logging in to the gateway and configuring basic settings ························ 24

 

Logging in through the console port ····························································································· 24

 

Setting up the configuration environment ················································································ 24

 

Setting terminal parameters ································································································· 25

 

Powering on the gateway ···································································································· 27

 

Logging in using Telnet ············································································································· 28

 

Verifying the network configuration ························································································ 28

 

Troubleshooting ············································································· 30

 

Troubleshooting methods ·········································································································· 30

 

Configuration terminal issues ······································································································ 30

 

No terminal display ············································································································ 30

 

Garbled terminal display ····································································································· 31

 

Summary of Contents for SecPath M9006



























































































Reviews:

No comments