56
Table 29 Fan tray specifications
Fan tray
Number of
fans
Fan diameter
Maximum
rotating speed
Maximum air
flow rate
M9006 fan tray
8
92 mm (3.62 in)
6000 RPM
960 CFM
M9010/M9010-GM
fan tray
12
120 mm (4.72 in)
5200 RPM
1152 CFM
M9014 upper fan tray 8
120 mm (4.72 in)
5200 RPM
1040 CFM
M9014 lower fan tray
4
120 mm (4.72 in)
5200 RPM
720 CFM
NOTE:
When the fan tray is damaged and needs to be replaced, select a new fan tray compatible with your
gateway.
Air filters
CAUTION:
Clean air filters periodically (at least once every three months) to guarantee adequate ventilation
and avoid over-temperature.
To prevent dusts from entering the chassis, you can configure air filters for the gateway as needed
and install the air filters at the air inlet vents.
The M9000 security gateway air filters include the M9006 air filter, the M9010 air filter, the
M9010-GM air filter, and the M9014 air filter. Order air filters compatible with your gateway.
Transceiver modules
The M9010 gateway series supports multiple types of transceiver modules. For the transceiver
modules available for the ports on an interface module or a service module, see the user guide for
the interface module or the service module.
DC power cord
DC power cords are used for connecting the DC power modules of an M9000 gateway to the
external DC power supply system.
Table 30 DC power cord specifications
DC power cord
Cable length
Description
0404A0E1
3 m (9.84 ft)
Used on the NSQM1DC2400
power module
0404A0E2
15 m (49.21 ft)
AC power cord
AC power cords are used for connecting the power modules of an M9000 gateway to the external AC
power supply system.
