A
Warnings and precautions
The following precautions must be taken for proper installation.
Rack precautions
l
Ensure that the leveling jacks on the bottom of the rack are fully extended to the
floor with the full weight of the rack resting on them.
l
In a single-rack assembly, stabilizers should be attached to the rack. In a multi-rack
assembly, the racks should be coupled together.
l
Always ensure the rack is stable before extending a component from the rack.
l
Extend only one component at a time; extending two or more components
simultaneously may cause the rack to become unstable.
Component precautions
l
Review the electrical and general safety precautions. For more information, see
Standardized warning statements for AC systems
l
Determine the placement of each component in the rack BEFORE you install the rails.
l
Install the heaviest components on the bottom of the rack first, and then work up.
l
Use a regulating uninterruptible power supply (UPS) to protect the component
from power surges, voltage spikes and to keep your system operating in case of a
power failure.
l
Allow the hot plug SATA drives and power supply modules to cool before
touching them.
l
Always keep the rack's front door and all panels and components on the appliance
closed when not servicing to maintain proper cooling.
Safeguard for Privileged Passwords Appliance Setup Guide
Warnings and precautions
15