One for All URC 8090, User Manual

Page: 10 / 22

SELECT
SEARCHING FOR YOUR CODE
If your components do not respond to the
Home
Producer 8 after trying all of the codes listed for your
brand, or if your brand is not listed at all, try
searching for your code. For example, after trying all
of the codes for your brand of TV, you still cannot
get the
Home Producer 8 to operate your TV, then:
1 Press and release the TV key.
2 Press and hold MAGIC until the
display screen changes from
[TV and the TIME] to [TIMED SEQ].
3 Press the MENU - key one time.
The display screen will change to
[CODE SET UP]. Press SELECT.
The display will change to
[DEV SET UP].
4 Press the MENU - key one time.
The display screen will change to
[DEV SEARCH]. Press SELECT.
The display will change to
[TV and XXX].
Note: XXX represents the last 3 digit code that was
entered prior to starting the search.
5 Press POWER. If your TV turns
OFF, press SELECT to lock in your
code and return the display to
[TV and the TIME]. If your TV does
not turn OFF, press MENU -. The
next available code will appear on
the display screen, then press
POWER again. Continue to press
POWER then MENU - until your TV
turns OFF. Once your TV turns
OFF, press SELECT to lock in your
code and return the display to
[TV and the TIME].
Note: If you are searching for your VCR, CD Player,
Laser Disc Player or DVD Player code, you may
want to use PLAY instead of POWER. Once your
component plays, press SELECT to lock in your
code.
1 Turn on your amplifier.
2 Press and release the AMP key.
3 Press and hold MAGIC until the
display screen changes from
[AMP and the TIME] to [TIMED SEQ].
4 Press the MENU - key one time.
The display screen will change to
[CODE SET UP]. Press SELECT.
The display will change to
[DEV SET UP].
5 Press SELECT and the display
screen will change to [AMP].
6 Enter the first Amplifier code listed
for your brand in the “Set Up Codes
for Amplifiers” on page 20, then
press SELECT. Point the remote
control at the Amplifier and press
POWER. Your Amplifier should turn
OFF. If your Amplifier turns OFF,
press the ESC key to return the
display to [AMP and the TIME]. If
your Amplifier does not turn OFF,
enter the next code in the code list
then press SELECT followed by
POWER again. Once the correct
code is entered, press the ESC key
to return the display to
[AMP and the TIME].
For a detailed explanation of what function each key
will perform in the Amplifier mode, please refer to
page 55 in the index.
To Set Up Your Amplifier
Set Up Codes for Audio Amplifiers
Accuphase 382
Acurus 765
AudioSource 011
Carver 269
Denon 160
Elan 647
Forte 606
GE 078
Goldstar 031
Harman/Kardon 106
JVC 331
Kenwood 356
Luxman 165
Magnavox 269
Marantz 269, 321
McIntosh 251
Nakamichi 321
NEC 264
Optimus 013, 300, 395
Panasonic 308
Philips 269
Pioneer 013, 300
Realistic 395
Sansui 321
Shure 264
Sony 220, 689
Soundesign 078, 211
Technics 308
Victor 331
Wards 013, 078, 211
Yamaha 133, 143, 354,
504
AMP
MAGIC
MENU-
SELECT
SELECT
SELECT
POWER
ESC
TV
MAGIC
MENU-
MENU-
SELECT
POWER
SELECT
MENU-
or