STAND: 17.06.2019
9910_Operation_Manual_STANDCONTROL_C1_Rev1v1_EN
Seite 6 von 41
3 Safety
This operating manual is to be preserved for future use. If a new copy nonetheless becomes neces-
sary, it is available, during the expected service life of the described product, from Customer Service
of Oelschläger
Metalltechnik
GmbH. Operating manuals of products that are currently being sold can
be downloaded from the website of the manufacturer. The manufacturer’s operating manual takes
precedence and must be followed without fail.
3.1 Use as intended
This table controller – hereinafter referred to as the controller – has been developed for use on office
desks in professional environments. Alterations to the table controller, or home use, are not permissi-
ble. Contravention will render the warranty null and void and void the liability of the manufacturer.
The controller must be assembled, put into operation and functionally checked by skilled and author-
ised personnel.
Special ambient conditions for using the table controller can be found in Section 14.
3.2 Target group
These operating instructions are aimed at the following group of persons:
- The commissioning staff who assembles and commissions the sit/stand desks.
- Furniture installers, maintenance staff who commission the sit/stand desk in sales rooms or at
the final customer.
The following knowledge is considered a precondition for the commissioning and installation of the
table controller STAND.CONTROL C1:
- Mechanical and electrical basic knowledge (corresponding illustration)
- Reading the instructions
3.3 Symbols used in the safety instructions
Danger
Stands for an immediate, threatening danger. If it is not avoided,
death or extremely serious injuries will result.
Warning
Stands for a possibly threatening danger. If it is not avoided, death or
extremely serious injuries may result.
Caution
Stands for a possibly threatening danger. If it is not avoided, slight
or minor injuries may be caused.
Note
Designates a possibly harmful situation. If it is not avoided, the plant or
something in its surroundings can get damaged.
Warning of a source of danger.
Not heeding these instructions can result in harm to health, life-threatening injuries
and damage to property!
Warning of electrical voltage.
Non-compliance with these warnings can result in injuries and property damage.
